Profile
Quach's HOME Profile Research Teaching Recruitment News/Links
Biography
| Education | Experience | Honors | laboratory | Teaching | Research | Publications | Invited
Lectures | Affiliations | Services
Biography
Dr. Wai-Meng Quach is
an Associate Professor in the Department of Civil and Environmental Engineering
(CEE) at the University of Macau (UM); and an Associate Editor for Advances in Structural Engineering – An International
Journal.
He was the Head of the CEE Department at the University of Macau, the founding
Chairman of Executive Board of the Macau Society of Metal Structures (MSMS),
and the Honorary Advisor of the Macau Construction Association (MCA). He was also
the academic advisor of The Macau lnstitution of Engineers (AEM), the advisor
of MSMS, and the Member-at-Large of the Hong Kong Society of Theoretical and
Applied Mechanics (HKSTAM). He is also the academic advisor of The Macau
lnstitution of Engineers (AEM), a member (MASCE) of the American Society of
Civil Engineers (ASCE), a charter member of the Structural Engineering
Institute (SEI) of ASCE, and a full member (MIIFC) of the International
Institute for FRP in construction (IIFC).
[ More ……
]
Education
- Ph.D. in Civil Engineering, The Hong Kong Polytechnic
University, Hong Kong (2005)
- M.Sc. in Structural Engineering
(with Dissertation), The
University of Manchester (known as University of Manchester Institute
of Science and Technology, UMIST, before October 2004), U.K. (ranked the
first in the class, 1997)
- B.Sc. in Civil Engineering, University of Macau, Macau (ranked the first in the class, 1995)
Experience
·
Head, Department
of Civil and Environmental Engineering, University of Macau, Macau (2013-2016)
·
Faculty Coordinator, for Accreditation of BSc Programmes in
FST (December 2010-July 2012)
·
Associate Professor, Department of Civil and
Environmental Engineering, University of Macau, Macau (2010-Present)
·
Assistant Professor, Department of Civil and Environmental Engineering, University
of Macau, Macau (2005-2010)
·
Lecturer, Department of Civil and Environmental
Engineering, University of Macau, Macau
(1997-2005)
·
Chui & Associates Civil/Structural Engineers, Macau (July-September 1994)
·
Macau Horse Racing Company, Ltd., Macau
(July-September 1993)
Honors and Awards
- UM
Long Service Award for 20 Years of Service (2018)
·
Outstanding Reviewer,
Engineering Structures (Q1 in field of Civil and Structural Engineering),
Elsevier (2017)
·
Outstanding Reviewer,
Thin-Walled Structures (Q1 in field of Civil and Structural Engineering),
Elsevier (2017)
·
Outstanding Reviewer,
Journal of Constructional Steel Research (Q1 in field of Civil and Structural
Engineering), Elsevier (2016)
·
Recognized Reviewer,
Engineering Structures, Elsevier (2015, 2017)
·
Recognized Reviewer,
Thin-Walled Structures, Elsevier (2015, 2017)
·
Recognized Reviewer,
Journal of Constructional Steel Research, Elsevier (2016)
·
Recognized Reviewer,
International Journal of Mechanical Sciences (Q1 in field of Civil and
Structural Engineering), Elsevier (2015)
- UM Long Service Award for 15 Years
of Service (2013)
- Honorary Advisor, The Macau
Construction Association (2008)
- Distinguish Alumnus Award, The
Workers’ Children
High School (2005)
- An invited interview by TDM Macau (1997)
- Top-Student Prize from UMIST, U.K., for
the M.Sc. study in Structural Engineering (1996)
- Scholarship from Macau
Government, for the M.Sc. study (1995-1996)
- Scholarship from Macau
Government, for the B.Sc. study (1991-1995)
- Scholarship from Choi's Educational
and Cultural Foundation (1991)
- Macau-Governor Prize (1991)
Laboratory In Charge
·
Thin-Walled Structures Laboratory (Research Lab)
·
Surveying Laboratory (1998-2007)
Teaching
Taught Courses
PhD
Courses
(*Current)
- Advanced
Topics in Civil Engineering (CIVL8001)*
M.Sc.
Courses
(*Current)
- Theory of
Elasticity and Plasticity (CIVL7002)*
- Analysis
and Design of Reinforced Concrete Members (CIVL7028)*
B.Sc.
Courses
(*Current)
- Introduction
to Civil and Environmental Engineering (CIVL1001)*
- Reinforced
Concrete Design (CIVL3004)*
- Advanced
Reinforced Concrete Design (CIVL4007)*
- Civil
Engineering Project I (CIVL4000)*
- Civil
Engineering Project II (CIVL4001)*
- Prestressed
Concrete Design (CIVL457)
- Mechanics
I: Statics (CIVL110)
- Mechanics
II: Dynamics (CIVL213)
- Surveying
(CIVL360)
- Structural
Design Practice (CIVL488)
- Technical
Drawing I (DRWG100)
- Technical
Drawing (DRWG101)
- Civil
Engineering Drawing (DRWG130)
Supervision for Creative Work
PhD
and Post-Doc Supervision
PhD
students: Y. Yao, J.J. Yan, Q. Zhang, K.Y. Kok (Co-supervised
external student).
Post-Doc: Dr. Man-Tai Chen (2018), Dr.
Zhengyi Kong (2018), Dr. Yancheng Cai (2014).
M.Sc.
Thesis Supervision
Student (Year): Some other students, …, K. YANG (Very Good, July 2014), J.F. HUANG (Excellent, May 2012), P. QIU (Excellent, Aug. 2011), C. CAI (Very Good, Nov. 2009).
B.Sc.
Final Year Project Supervision
(^^ FST Dean’s FYP List Award; #
Ocean-Tech Award winners for their excellent performance in thesis work)
Student (Year): Some other students (each year), …, C.S. HO
(2014/2015), X. LIU (2013/2014), H. JI (2013/2014), Kam-Sim HOI^^ (2012/2013), Shao-Fu CHEN^^
(2012/2013), Jun CAO (2010/2011), Leng-Chong
KONG (2009/2010), Ka-Kit LEONG (2009/2010), Sai LUO (2009/2010), Wai-Pan CHAO#
(2008/2009), Ieng-Chi AOIEONG# (2008/2009), Pei QIU# (2007/2008), Meng-Zhe GAO
(2005/2006), Weng-Hong HO (2003/2004), Kit-Hou LEI (2003/2004), Heng-Heng NG
(2001/2002), Yi-Bin LI (2000/2001), Kai-Io MOK (2000/2001), Ka-Hou HO
(1999/2000), Kin-Man KUOK (1999/2000), Kim-Hong LEONG (1999/2000).
Student Assessment
PhD
Thesis and Oral Examination Committee
Student (Year): Linshuang Zhao (2018), Gilberto Garcia (2017),
Heqing Mu (2014), and other PhD candidates from the university and other
overseas universities.
PhD
Qualifying Examination Committee, PhD Thesis Proposal Assessment Panel
Student (Year): Some other students (each year), …, Ka-Man TOU
(2013), Heqing MU (2013), Xiuxiu GUO (2012), Sin-Chi KUOK (2012), Hai-Tao ZHU
(2008), Hon-Ping WONG (2007).
M.Sc.
Thesis Examination Committee
Student (Year): Some other students (each year), …, Kun WANG
(2013), Heqing MU (2010), Sin-Chi KUOK (2009), He ZHANG (2009), Siu-Kei LAU
(2009), Jingjing DONG (2009).
B.Sc.
Thesis Examination Committee
Student (Year): Some other students (each year), …, Tianlong YUE (2011/2012), Jiongyi ZHU (2011/2012), YaJuan DUAN (2010/2011), Hong-In HO (2010/2011), Rui GONG (2009/2010), Bing LIU (2009/2010), Fang-Zhou ZOU (2008/2009), Yi YANG (2008/2009), Shu-Yang CHEN
(2008/2009), Dong-Ting LIAO (2008/2009), Meng-Soi LAI (2007/2008), On-Kei LOU
(2006/2007), Ka-Man FU (2005/2006), Meng-Zhe GAO (2005/2006), Ka-Kit WONG
(2004/2005), Man-I LAM (2003/2004), Ka-Man TOU (2003/2004), Weng-Hong HO
(2003/2004), Kit-Hou LEI (2003/2004), Ka-Man NG (2002/2003), Heng-Tak CHOI
(2002/2003), Ip-Man AO (2001/2002), Heng-Heng NG (2001/2002), Chon-Man TOU
(2000/2001), Yi-Bin LI (2000/2001), Kai-Io MOK (2000/2001), Kuok-Si WONG
(1999/2000), Chi-Lun NG (1999/2000), Wai-Kuong MA (1999/2000), Ka-Hou HO (1999/2000),
Kin-Man KUOK (1999/2000), Kim-Hong LEONG (1999/2000).
Research
Research
Interests
Cold-formed
metal structures, Additive manufactured (3D printed) metal structures,
Stainless steel structures, Residual stresses and cold-work effect, Mechanical
behavior of sheet metals, Structural stability, Applied mechanics, and
Numerical modeling.
Recent
Research Projects and Grants
- Quach, W.M. (PI) and Lau, H.H.
(Co-I), Structural performance and design of self-drilling screwed
connections in high strength steel thin-walled structures, funded by the
Fundo para o Desenvolvimento das Cięncias e da Tecnologia (FDCT) of the
Macao S.A.R., 31/03/2016 – 30/03/2019.
- Quach, W.M. (PI), Design of
cold-formed and hot-finished columns with elliptical hollow sections,
funded by the Fundo para o Desenvolvimento das Cięncias e da Tecnologia
(FDCT) of the Macao S.A.R., 18/06/2015 – 17/06/2018
- Quach, W.M. (PI), One-time special
Fund for PhD Student Support, funded by the University of Macau, 01/01/2015
– 31/12/2017.
- Quach, W.M. (PI), The Cold-Work
Effect on the Column Behaviour of Cold-Formed Steel Oval Hollow Sections,
funded by the Research Committee of University of Macau, 01/05/2013 –
31/04/2016.
- Quach, W.M. (PI), Residual Stresses
in Cold-Formed Stainless Steel Rectangular Hollow Sections due to Cold
Bending, funded by the Research Committee of University of Macau,
01/09/2010 – 28/02/2013.
- Quach, W.M. (PI), Compression
Strength of Cold-Formed Steel Channel Sections with the Strength
Enhancement in Corners, funded by the Fundo para o Desenvolvimento das
Cięncias e da Tecnologia (FDCT) of the Macao S.A.R., 01/09/2007 –
01/09/2010.
- Quach, W.M. (PI), Compression
Strength of Cold-Formed Steel Channel Sections with the Strength Enhancement
in Corners, funded by Research Committee of University of Macau,
01/09/2007 – 01/09/2010.
- Quach, W.M. (PI), Initial Material
Imperfection in Cold-Formed Circular Hollow Sections, funded by the
Research Committee of University of Macau, 01/06/2006 – 31/12/2008.
Selected Publications
Journal
Papers
(**Students
or Post-Doc. ^Corresponding author)
- Yan, J.J.**, Song, H., Dong, Y.P.,
Quach^, W.M. , and Yan^, M. (2019), High strength (~2000 MPa) or highly
ductile (~11%) additively manufactured H13 by tempering at different
conditions, (Under review).
- Yao, Y.**, Quach^, W.M., and Young,
B. (2019), Cross-section behavior of cold-formed steel elliptical hollow
sections – a numerical study, Engineering
Structures, (Accepted). [Q1 in Civil Eng.]
- Cai, Y., Quach^, W.M., and Young,
B. (2019), Experimental and numerical investigation of concrete-filled
hot-finished and cold-formed steel elliptical tubular stub columns, Thin-Walled Structures, 145,
106437. [Q1 in Civil Eng.]
- Yao, Y.**, Quach^, W.M., and Young,
B. (2019), Finite element-based method for residual stresses in
cold-formed steel hollow sections, Engineering
Structures, 188, 24-42. [Q1 in Civil Eng.]
- Yan, J.J.**, Chen^, M.T.**, Quach,
W.M., Yan, M., and Young, B. (2019), Mechanical properties and
cross-sectional behavior of additive manufactured high strength steel
tubular sections, Thin-Walled
Structures, 144, 106158. [Q1 in Civil Eng.]
- Cai, Y., Quach^, W.M., Chen, M.T.,
and Young, B. (2019), Behavior and design of cold-formed and hot-finished
steel elliptical tubular stub columns, Journal
of Constructional Steel Research, 156, 252-265. [Q1 in Civil Eng. Q1
in Construction & Building Technology.]
- Yan, J.J.**, Zhou, Y.H., Gu, R.N.,
Zhang, X.M., Quach^, W.M. , and Yan^, M. (2019), A comprehensive study of
steel powders (316L, H13, P20 and 18Ni300) for their selective laser
melting additive manufacturing, Metals,
9(86), pp.1-20. [Q1 in Metallurgy & Metallurgical Eng.]
- Abambres^, M., and Quach, W.M.
(2016), Residual Stresses in Steel Members: A Review of Available
Analytical Expressions, International
Journal of Structural Integrity, 7(1), pp.70-94. [Q3 in Civil &
Structural Eng. Q3 in Mechanical Eng., according to SJR.]
- Quach, W.M., and Young^, B. (2015),
Material properties of cold-formed and hot-finished elliptical hollow
sections, Advances in Structural
Engineering, 18(7), pp.1101-1114. [Q2 in Civil & Structural Eng.
Q2 in Building & Construction, according to SJR.]
- Quach^, W.M., and Huang, J.F.**
(2014), Two-stage stress-strain models for light-gauge steels, Advances in
Structural Engineering, 17(7), pp.937-949. [Q2 in Civil &
Structural Eng. Q2 in Building & Construction, according to SJR.]
- Quach^, W.M., and Qiu, P.** (2014),
Strength and ductility of corner materials in cold-formed stainless steel
sections, Thin-Walled Structures, 83,
pp.28-42. [Q1 in Civil Eng.]
- Quach, W.M., Teng^, J.G., and
Chung, K.F. (2010), Effect of the manufacturing process on the behaviour
of press-braked thin-walled steel columns, Engineering Structures, 32, pp.3501-3515. [Q1 in Civil Eng.]
- Quach, W.M., Teng^, J.G., and
Chung, K.F. (2009), Residual stresses in press-braked stainless steel
sections - I: Coiling and uncoiling of sheets, Journal of Constructional Steel Research, 65,
pp.1803-1815. [Q1 in Civil Eng. Q1 in
Construction & Building Technology.]
- Quach, W.M., Teng^, J.G., and
Chung, K.F. (2009), Residual stresses in press-braked stainless steel
sections - II: Press-braking operations,
Journal of Constructional Steel Research, 65, pp.1816-1826. [Q1 in Civil Eng. Q1 in Construction &
Building Technology.]
- Quach^, W.M., and Qiu, P.** (2009),
Accurate prediction of mechanical properties for cold-formed stainless
steel section, Journal of
Yantai University, Natural Science and Engineering Edition, 22(3),
pp.217-228.
- Quach, W.M., Teng^, J.G., and
Chung, K.F. (2008), Three-stage full-range stress-strain model for
stainless steels, Journal
of Structural Engineering, ASCE, 134(9), pp.1518-1527. [Q1 in Civil & Structural Eng. Q1 in
Building & Construction, according to SJR.]
- Quach^, W.M., Teng, J.G., and
Chung, K.F. (2007), Finite element predictions of residual stresses in
cold-formed steel sections, Progress in Steel Building Structures, 9(3), pp.26-32.
- Quach, W.M., Teng^, J.G., and
Chung, K.F. (2006), Finite element predictions of residual stresses in
press-braked thin-walled steel sections, Engineering
Structures, 28, pp.1609-1619. [Q1 in Civil Eng.]
- Quach, W.M., Teng^, J.G., and
Chung, K.F. (2004), Residual stresses in
steel sheets due to coiling and uncoiling: a closed-form analytical
solution,
Engineering Structures, 26,
pp.1249-1259. [Q1
in Civil Eng.]
Conference
Papers
(**Students
or Post-Doc. ^Corresponding author)
- Chen, M.T.**, Yan, J.J.**, Quach,
W.M., Yan, M., and Young, B. (2018), Additive manufactured high strength
steel tubular sections, The Eighth
International Conference on THIN-WALLED STRUCTURES (ICTWS 2018),
Lisbon, Portugal, July 24-27, 2018 (Keynote Paper).
- Yao, Y.**, Quach, W.M., and Young,
B. (2018), Simplified residual stress model for cold-formed steel
elliptical hollow sections, The
Eighth International Conference on THIN-WALLED STRUCTURES (ICTWS 2018),
Lisbon, Portugal, July 24-27, 2018
- Yao, Y.**, Quach, W.M., and Young,
B. (2018), Numerical simulation for stub columns behavior of cold-formed
steel elliptical hollow sections, The
Eighth International Conference on THIN-WALLED STRUCTURES (ICTWS 2018),
Lisbon, Portugal, July 24-27, 2018.
- Cai, Y.C., Quach, W.M., and Young,
B. (2018), Tests of concrete-filled cold-formed and hot-finished steel
elliptical tubular stub columns, The
Eighth International Conference on THIN-WALLED STRUCTURES (ICTWS 2018),
Lisbon, Portugal, July 24-27, 2018
- Yao, Y.**, Quach^, W.M., and Young,
B. (2018), Numerical simulation for residual stresses in cold-formed steel
hollow sections, International
Conference on Engineering Research and Practice for Steel Construction
2018 (ICSC2018), Hong Kong, China, 5-7 Sep. 2018.
- Lau, H.H., Ting, T.Z.H., Quach,
W.M., Tie, D.Y.X., Fairuz, S., and Ahmadi, A. (2016), A Study on
Performances of Screw Connection for Cold-formed Steel Structures. In Proceedings of the 8th International
Conference on Steel and Aluminium Structures, 7-9thDecember 2016, Hong
Kong.
- Yao, Y.**, Quach, W.M., and Young,
B. (2016), Finite Element Simulation for Residual Stresses in Cold-Formed
Steel Tubes, Proceedings of the
Recent Advances in Steel and Composite Structures 2014, Proceedings of the
20th Annual Conference of HKSTAM, the 12th Jiangsu-Hong Kong Forum on
Mechanics and its Application, 09 April 2016, Hong Kong, pp.25.
- Quach^, W.M., and Young, B. (2015),
Coupon tests and residual strain measurements of cold-formed and
hot-finished elliptical hollow sections, Proceedings of the Eighth International Conference on Advances in
Steel Structures (ICASS2015), July 21-24, 2015, Lisbon, Portugal,
pp1-12.
- Quach^, W.M., and Yang, K.**
(2014), New stress-strain models for stainless steels, Proceedings of the Recent Advances in
Steel and Composite Structures 2014, The Hong Kong Institute of Steel
Construction (HKISC), Hong Kong, 1 December 2014, pp27-33.
- Yang, K.**, and Quach^, W.M.
(2013), New full-range stress-strain model for stainless steels, Proceedings of the 17th Annual
Conference of HKSTAM 2013, the 9th Jiangsu-Hong Kong Forum on Mechanics
& Its Application, The 3rd Symposium on the Development of Mechanics
in Macau, Hong Kong and Macau, 22-23 March 2013, pp.37.
- Quach^, W.M., and Qiu, P.** (2012),
Strength and ductility of corner materials in cold-formed stainless steel
sections, Fourth International
Experts Seminar on Stainless Steel in Structures (Experts12), The
Steel Construction Institute (SCI), Ascot, U.K.,
6–7 December 2012 (http://www.steel-stainless.org/experts12).
- Quach^, W.M., and Cao, J.** (2012),
Simplified residual stress model for press-braked stainless steel
sections, Proceedings of the 10th
International Conference on Advances in Steel Concrete Composite and
Hybrid Structures (ASCCS2012), 2– 4 July 2012, Singapore, pp.145-153.
- Quach^, W.M., and Huang, J.F.**
(2012), Stress-strain model for light-gauge steels with yield plateau
prior to strain hardening, Proceedings
of the 10th International Conference on Advances in Steel Concrete
Composite and Hybrid Structures (ASCCS2012), 2– 4 July 2012,
Singapore, pp.154-162.
- Quach^, W.M., and Qiu,
P.** (2011),
Numerical modelling of mechanical behaviour of
cold-worked materials in cold-formed stainless steel sections, Proceedings of the 15th Annual
Conference of HKSTAM, the 7th Jiangsu-Hong Kong Forum on Mechanics and its
Application, the 2nd Symposium on the Development of Mechanics in Macau, 11–12 March, 2011, Hong Kong and Macau, pp.37.
- Quach^, W.M., and Huang,
J.F.** (2011),
Stress-strain models for light gauge steels, Proceedings of the12th East
Asia Pacific Conference on Structural Engineering & Construction
(EASEC-12), Hong Kong, 26-28
Jan. 2011, pp.170-171 (full
paper in CD Rom).
- Quach^, W.M., and Cai, C.** (2010),
Analytical solution for residual stresses in cold-formed stainless steel
circular hollow sections due to cold bending, Proceedings of the13th International Symposium on
Tubular Structures (ISTS 13), 15 – 17 December, 2010, Hong
Kong, pp.241-248.
- Quach^, W.M., and Cai, C.** (2010),
Deformationally-induced residual stresses in cold-formed steel circular
hollow sections: An analytical solution, Steel & Composite Structures– Proceedings of the 4th International Conference, 21 – 23 July
2010, Sydney, Australia, pp.310-311
(full paper in CD Rom).
- Quach^, W.M., and Cai, C.** (2010),
Deformationally-induced residual stresses in cold-formed stainless steel
circular hollow sections: An analytical solution, Proceedings of the 14th Annual
Conference of HKSTAM, the 7th Shanghai-Hong Kong Forum on Mechanics &
Its Application, Hong Kong, 13 March 2010, pp.51.
- Quach^, W.M., and Qiu, P.** (2009),
Accurate prediction of the mechanical properties of corner materials in
cold-formed stainless steel sections, Proceedings
of the International Symposium on Advances in Steel and Composite
Structures (2009-ISASCS), Tsinghua University, Beijing, P.R.
China, 23 April 2009, pp.87-99. (Invited Lecture/Paper)
- Quach^, W.M., and Qiu, P.** (2009),
Accurate prediction of mechanical properties for cold-formed stainless
steel sections, Proceedings
of the International Symposium on Advances in Steel and Composite
Structures (ISASCS 2009), Yantai, P.R. China, 25 April 2009, pp.41-56.
(Invited
Lecture/Paper)
- Bin, Y.**, and Quach^, W.M. (2009),
Analytical solution for residual stresses in cold-formed steel square
hollow sections due to cold bending, Proceedings
of the 13th Annual Conference of HKSTAM 2008/2009, the 5th Jiangsu-Hong
Kong Forum on Mechanics & Its Application, Symposium on the
Development of Mechanics in Macau, Hong Kong and Macau, 13-14
March 2009, pp.12.
- Quach^, W.M. (2008), Effect of the
Manufacturing Process on the Mechanical Properties and Structural
Behaviour of Cold-Formed Steel Member, Proceedings
of the Technical Symposium on Profile Steel Deckings in Steel
and Composite Structures, Macao, 17 October 2008, Macau
Society of Metal Structures, pp.63-82. (Invited Lecture/Paper)
- Quach^, W.M., Qiu, P.**, and Cai, C.**
(2008), On the assessment of the effect of cold work in cold-formed
stainless steel sections, Proceedings
of the Second International Symposium on Advances in Steel and Composite
Structures (2nd ISASCS 2008), 1 August 2008, Singapore, pp.110-131.
(Invited
Lecture/Paper)
- Quach^, W. M., and Qiu, P.**
(2008), Numerical modelling of the stress-strain behaviour of corner
materials in cold-formed stainless steel sections, Proceedings of the Eleventh East
Asia Pacific Conference on Structural Engineering & Construction
(EASEC-11), Taipei, 19-21 Nov. 2008, pp.132.
- Quach^, W.M., Teng, J.G., and
Chung, K.F. (2008), On the plane strain assumption in the modelling of the
cold-forming process of press-braked columns, Thin-Walled Structures– Recent Innovations and
Developments: Proceedings
of the Fifth International Conference on Thin-walled Structures (ICTWS
2008), Brisbane, Australia, 18–20 June 2008, Vol. 1, pp.289-296.
- Quach^, W.M., Teng, J.G., and
Chung, K.F. (2008), Residual stresses in press-braked stainless steel
sections: effects of coiling curvature and mechanical properties, Thin-Walled Structures– Recent
Innovations and Developments: Proceedings of the Fifth International Conference on
Thin-walled Structures (ICTWS 2008), Brisbane, Australia,
18–20 June 2008, Vol. 2, pp.907-914.
- Quach^, W.M., Teng, J.G. and Chung,
K.F. (2007), Analytical model for residual stresses in press-braked
stainless steel thin-walled sections, Advances in Steel Structures: Proceedings
of the Fifth International Conference on Advances in Steel Structures
(ICASS 2007), Singapore, 5 – 7 December 2007, Research
Publishing, Vol. 3, pp.431-438.
- Quach^, W.M., Teng, J.G. and Chung,
K.F. (2007), New full-range stress-strain model for stainless steels, Steel
and Composite Structures: Proceedings of the Third International
Conference on Steel and Composite Structures (ICSCS07),
Manchester, U.K., 30 July-1 August 2007, Taylor & Francis, pp.139-144.
- Quach^, W.M. (2006), Residual
stresses in press-braked steel sections and their effect on column
behaviour, Proceedings of The Second International Symposium on
Cold-formed Metal Structures (ISCMS'06), Hong Kong, 8th December 2006,
Hong Kong Institute of Steel Construction, pp.127-147.
(Invited
Lecture/Paper)
- Quach^, W.M., Teng, J.G., and
Chung, K.F. (2006), Effect of the manufacturing process on the behaviour
of steel columns of press-braked sections, Advances in
Structural Engineering - Theory and Application: Proceedings of the Ninth
International Symposium on Structural Engineering for Young Experts (第九届國際結構工程青年專家研討會, ISSEYE-9), Fuzhou & Xiamen, China, 18-21 August 2006, China Science Press, Vol. 2, pp.1329-1335.
- Quach^, W.M., Teng, J.G., and
Chung, K.F. (2004), Residual
stresses in steel sheets due to coiling and uncoiling, Progress in
Structural Engineering, Mechanics and Computation: Proceedings of the
Second International Conference on Structural Engineering, Mechanics and Computation
(SEMC 2004), Cape Town, South Africa, 5-7 July 2004, A.A. Balkema, pp.270.
- Quach^, W.M., Teng, J.G., and
Chung, K.F. (2003), Finite element predictions of residual stresses in
cold-formed sections, Advances in Structures: Proceedings of the International
Conference on Advances in Structures (ASSCCA'03), Sydney, Australia,
22-25 June 2003, A.A. Balkema, Vol. 1, pp.325-331.
- Quach^, W.M., and Phipps, M.E.
(1999), Parametric study of anchorage zone stresses in post-tensioned
masonry diaphragm walls, Computational Mechanics for the Next
Millennium - Solid Mechanics and Fluid Mechanics: Proceedings of the
Fourth Asia-Pacific Conference on Computational Mechanics (APCOM'99),
Singapore, 15-17 December 1999, Elsevier Science, Vol. 1, pp.87-92.
- Quach^, W.M. (1999), Finite Element
Analysis of Anchorage Zone Stresses in Post-tensioned Masonry Diaphragm
Walls, Computational Methods in Engineering and Science: Proceedings of
the International Conference on Enhancement and Promotion of Computational
Methods in Engineering and Science (EPMESC VII) , Macao, 2-5 August
1999, Elsevier Science, Vol. 1, pp.413-423.
Edited
Proceedings
- Quach, W.M. (2008), Proceedings of the International Symposium on Global Developments in
Steel Structures, Macao, 6 December 2008, Macau Society of
Metal Structures, Macao.
- Quach, W.M. (2008), Proceedings of the Technical Symposium on Profile Steel Deckings in Steel
and Composite Structures, Macao, 17 October 2008, Macau
Society of Metal Structures, Macao.
Theses
- Quach, W.M.
(2005), Residual Stresses in Cold-Formed Steel Sections and Their
Effect on Column Behaviour, PhD Thesis, The Hong Kong Polytechnic
University, Hong Kong, August 2005.
- Quach, W.M.
(1996), The Stress Distribution in the Anchorage Blocks of Prestressed
Masonry, MSc Dissertation, U.M.I.S.T., U.K., October 1996.
- Quach, W.M.
(1995), A Parametric Study of Cable-Stayed Bridge by Flexibility
Method, BSc Thesis, University of Macau, Macau, June 1995.
Invited Lectures/Presentations
- Seminar “土木工程 與 人類文明 Civil Engineering
and Civilization” (in Mandarin), Ma Man Kei and Lo Pak Sam College - MLC,
23 January 2019
- Seminar “Civil
Engineering and Civilization”, Ma Man Kei and Lo Pak Sam College (MLC), 11
October 2017
- “土木工程 與 人類文明 Civil Engineering
and Civilization” (in Cantonese), Escola Keang Peng鏡平學校 (2016); Escola
Hou Kong 濠江中學 (2019)
- Strength and
ductility of corner materials in cold-formed stainless steel sections, Fourth International Experts Seminar on
Stainless Steel in Structures (Experts12), The Steel Construction Institute
(SCI), Ascot, U.K.,
6–7 December 2012 (http://www.steel-stainless.org/experts12).
- Analytical
solution for residual stresses in cold-formed steel circular hollow
sections due to cold bending: An analytical solution, The International Symposium on
Advances in Steel and Composite Structures (ISASCS 2009),
Nanchang, China, 12 Dec. 2009.
- Accurate
prediction of the mechanical properties of corner materials in cold-formed
stainless steel sections, The
International Symposium on Advances in Steel and Composite Structures
(2009-ISASCS), Tsinghua University, Beijing, P.R. China, 23
April 2009.
- Accurate
prediction of mechanical properties for cold-formed stainless steel
sections, The International
Symposium on Advances in Steel and Composite Structures (ISASCS 2009),
Yantai, P.R. China, 25 April 2009.
- Effect of the
Manufacturing Process on the Mechanical Properties and Structural
Behaviour of Cold-Formed Steel Member, The Technical Symposium on Profile Steel Deckings in Steel
and Composite Structures, Macao, 17 October 2008.
- On the assessment
of the effect of cold work in cold-formed stainless steel sections, The Second International Symposium
on Advances in Steel and Composite Structures (2nd ISASCS 2008), Singapore,
1 August 2008.
- Residual stresses
in press-braked steel sections and their effect on column behaviour, The
Second International Symposium on Cold-formed Metal Structures (ISCMS'06),
Hong Kong, 8th December 2006.
Professional Affiliations
- Founding Chairman,
Executive Board, Macau
Society of Metal Structures (December 2007~2010)
- Chairman, Advisory Board, Macau Society of Metal
Structures (Since December 2013)
- Academic Advisor, Macau lnstitution of Engineers (AEM, 澳門工程師學會) (Since February 2014)
- Advisor, Advisory Board, Macau Society of Metal
Structures (December 2010~2013)
- Member-at-large,
Executive Committee, Hong
Kong Society of Theoretical and Applied Mechanics (HKSTAM) (Since
2010)
- Member (Life), Hong Kong Society of Theoretical
and Applied Mechanics (HKSTAM) (2010~2016)
- Member (MMSMS), Macau Society of Metal Structures
(Since 2008)
- Member (MASCE), American Society of Civil
Engineers (As Associate Member since 1998, and then elected to become
Member since 2006)
- Member (MIIFC), The International Institute
for FRP in Construction (Since 2006)
- Charter Member, The Structural
Engineering Institute of the American Society of Civil Engineers
(Since 1998)
Services
For Professional Societies and Institutions
- Expert Witness,
for a Guinness World Record earned by MGM Cotai for the largest free-span
gridshell glazed roof (self-supporting) (2019)
- Academic Peer
Reviewer for QS World University Rankings (Since 2013)
- Adjunct Associate Professor, Center for Macau Studies, University
of Macau (2018-2021)
- External Associate Supervisor, Curtin University, Sarawak
(2017-2019)
- Academic Advisor, Macau lnstitution of Engineers (AEM, 澳門工程師學會) (Since February 2014)
- Honorary Advisor, Macau Construction
Association (MCA), Macau (December 2008~2010)
- Founding Chairman,
Executive Board, Macau Society of Metal Structures (December 2007~2010)
- Advisor, Advisory Board, Macau Society of Metal
Structures (December 2010~2013)
- Member-at-large,
Executive Committee, Hong Kong Society of Theoretical and Applied Mechanics (HKSTAM) (2010~2016)
- Chairman,
Provisional Organizing Committee, Macau Society of Metal Structures (July - December 2007)
- External
Associate Supervisor, Curtin University, Sarawak (2017-2019)
- Foreign
Examiner, PhD Thesis Examination Committees of other overseas universities.
For Journals, Magazines and Conferences
- Associate Editor, Advances in Structural Engineering
(An International Journal)
- Editorial Board Member
(In charge of the Science-and-Technology Section), New Generation
Magazine, Macau (1999 – 2000)
- Reviewer, Engineering Structures (An International Journal)
- Reviewer, Advances
in Structural Engineering (An International Journal)
- Reviewer, Advanced Steel Construction (An International
Journal)
- Reviewer, Material Science and
Engineering A (An International Journal)
- Reviewer,
International Journal of Solids and Structures
- Reviewer,
Thin-Walled Structures
- Reviewer, Journal
of Constructional Steel Research
- Reviewer, Finite
Elements in Analysis and Design
- Reviewer,
Structural Engineering and Mechanics
- Reviewer,
Engineering Failure Analysis
13. Reviewer, ICE Journal –
Structures and Buildings
14. Reviewer, International
Journal of Mechanical Sciences
15. Reviewer, Journal of
Offshore Mechanics and Arctic Engineering
- Academic Committee
Member 学术委员会委员,第⼀届土木工程计算与仿真技术学术会议(由华中科技大学承办,由南方科技大学、清华大学、华南理工大学协办),2019年5月24-26日,武汉 (http://www.lvtumu.com/thread-13097-1-1.html).
- International
Scientific Committee Member, The 9th International Conference on Steel and
Aluminium Structures (ICSAS19), 3-5 July 2019, Bradford, UK.
- Session Chair, The
Eighth International Conference on Thin-Walled Structures (ICTWS 2018),
24–27 July 2018, Lisbon, Portugal.
- International
Scientific Committee Member, The Eighth International Conference on
Thin-Walled Structures (ICTWS 2018), 24–27 July 2018, Lisbon,
Portugal.
- Session Chair, The
International Symposium on Design of Steel & Composite Structures in
accordance with Eurocodes, 25 August 2017, Hong Kong.
- Member of
Organizing Committee, The 4th PhD Student Research Seminar on Steel and
Composite Structures, 26-28 August 2017, Hong Kong and Macau (co-organized
by The University of Macau, The University of Hong Kong, and Tongji
University).
- International
Scientific Committee Member, The 8th International Conference on Steel and
Aluminium Structures, 7-9th December 2016, Hong Kong.
- International
Scientific Committee Member, The Eighth International Conference on
Advances in Steel Structures (ICASS’2015), 21–24 July 2015, Lisbon,
Portugal (http://icass2015.ist.utl.pt/index.html)
- Session Chair, The
Eighth International Conference on Advances in Steel Structures
(ICASS’2015), 21–24 July 2015, Lisbon, Portugal (http://icass2015.ist.utl.pt/index.html)
- Moderator, 2014 MIECF (2014年澳門國際環保合作發展論壇),
27-29 March 2014, Macau
26. Technical Program
Committee Chair, the 2013 International Conference on Mechanical Structures and
Smart Materials (ICMSSM 2013), 16–17 Nov .,2013 Xiamen, China (http://www.icmssm.org/Committee.html
)
- Member of
Organizing Committee, the 17th Annual Conference of HKSTAM, the 9th
Jiangsu-Hong Kong Forum on Mechanics and its Application, the 3rd
Symposium on the Development of Mechanics in Macau, 22–23 March, 2013,
Hong Kong and Macau
- Session Chair, the
International Symposium on Design of Steel & Composite Structures
according to Eurocodes, 13 December 2013, Hong Kong
- Session Chair, the
17th Annual Conference of HKSTAM, the 9th Jiangsu-Hong Kong Forum on
Mechanics and its Application, the 3rd Symposium on the Development of
Mechanics in Macau, 22–23 March, 2013, Hong Kong and Macau
- Session Chair,
Fourth International Experts Seminar on Stainless Steel in Structures
(Experts12), The Steel Construction Institute (SCI), Ascot, the United
Kingdom, 6–7 December 2012
- Member of
Organizing Committee, The 5th Cross-strait Conference on Structural and
Geotechnical Engineering, 13 - 15 July, 2011, Hong Kong
- Session Chair, the
Third International Symposium on Innovative Design of Steel Structures, 28
June 2011, Hong Kong
- Session Chair,
One-day seminar on The Design of Steel Structures -- Structural Hollow
Sections, Hong Kong, 01 April 2011
- Session Chair, the
15th Annual Conference of HKSTAM, the 7th Jiangsu-Hong Kong Forum on
Mechanics and its Application, the 2nd Symposium on the Development of
Mechanics in Macau, 11–12 March, 2011, Hong Kong and Macau
- Member of
Organizing Committee, the 15th Annual Conference of HKSTAM, the 7th
Jiangsu-Hong Kong Forum on Mechanics and its Application, the 2nd
Symposium on the Development of Mechanics in Macau, 11–12 March, 2011,
Hong Kong and Macau
- Session Chair, The
12th East Asia-Pacific Conference on Structural Engineering and
Construction (EASEC-12), Hong Kong, 26-28 January 2011
- Member of Local
Organizing Committee, The 13th International Symposium on
Tubular Structures (ISTS13), Hong Kong, 15-17 December 2010
- Session Chair, The 13th
International Symposium on Tubular Structures (ISTS13), Hong Kong, 15-17 December 2010
- Member of the
Editorial and Programme Committee, the 12th International Conference on Enhancement and Promotion of
Computational Methods in Engineering and Science (EPMESC XII), Macau, 30 November - 03 December 2009
- Chairman of the
Organizing Committee, The
International Symposium on Global Developments in Steel Structures,
Macau, 6 December 2008
- Chairman of the
Organizing Committee, The
Technical Symposium on Profile Steel Deckings in Steel and Composite
Structures, Macau, 17 October 2008
- Session Chair, The
Second International Symposium on Innovative Design of Steel Structures,
Hong Kong, 5 December 2008
- Session Chair, The
Technical Symposium on Profile Steel Deckings in Steel and Composite
Structures, Macau, 17 October 2008
- Session Chair, The
Fifth International Conference on Thin-walled Structures (ICTWS 2008),
Brisbane, Australia, 18–20 June 2008
- Member of the
Organizing Committee, the 9th International Conference on
Enhancement and Promotion of Computational Methods in Engineering and
Science (EPMESC IX),
Macau, November 2003
For Governmental Agencies
- Overseas Reviewer (for research proposals), Czech Science Foundation, Czech Republic
(Since 2012)
- Overseas Reviewer (for ERG research proposals), Research Grants
Council, Hong Kong S.A.R. Government (Since 2012)
- Technical Advisor, for Sichuan
Post-disaster School Reconstruction Project hosted by DSEJ Macao S.A.R.,
September 2008
For University and Faculty
- Member, Non Resident Fellow Advisory Committee, Ma Man Kei and Lo
Pak Sam College (MLC) (2018/2019-Now)
- Non-Resident Fellow, Ma Man Kei and Lo Pak Sam College - MLC (Since
2017/2018)
- Mentor, Mentorship program, Ma Man Kei and Lo Pak Sam College (MLC)
(2017/2018-Now)
- College Affiliate, Ma Man Kei and Lo Pak Sam College - MLC
(2016/2017)
- College Affiliate, Shiu Pong College (2015/2016)
- Academic Advisor, Student Advisory Program (Since 2013)
- Participating in “Tea with Professor” organized by the Future
Studies and Placement Center (since 2011)
- Faculty Coordinator, for Accreditation of BSc Programmes in FST (December 2010~July 2012)
- Departmental Coordinator (Programme Leader), Civil Engineering Programme Accreditation Committee, FST (2010)
- Student Advisor of
the Civil and Environmental Engineering Department, FST Training and
Placement Network (2008~2013)
- Mentor, Mentorship
Program (Since 2005)
- Member of the Selection
Panel for the Recommended Undergraduate Direct Admission (2006, 2007,
2010)
- Honorable Judge,
Chain Reaction Contest, organized by FST Students’ Association (March
2010)
- Member, the Civil
Engineering Program Review Committee (2007, 2009)
- Examiner, BSc
Thesis Examination Committees (Since 1999)
- Examiner, MSc
Thesis Examination Committees for Sin-Chi KUOK (2009), He ZHANG (2009),
Siu-Kei LAU (2009), Jingjing DONG (2009)
- Examiner, PhD
Qualifying Examination Committees for Xiuxiu GUO (2012), Sin-Chi KUOK
(2012), Hai-Tao ZHU (2008), and Hon-Ping WONG (2007)
- Working Secretary,
PhD Oral Defence Examination for Qian LI (2008)
- Faculty
Representative of FST, in the Staff-Student Consultative Committee of the
University of Macau (2005/2006)
- Team Leader and
Technical Advisor of the University of Macau, participating the
Inter-University Invitational Civil Engineering Competition (2004)
For Others
- Member of the Referee Panel, The
2011 Macao Science Center Writing Competition (2011年澳門科學館展覽觀感「探索科學館」徵文比賽), organized by
Macao Science Center (澳門科學館), (2011)
- Member of the Organizing Committee,
The 1999 and 2000 Macau High School Fun Science Competition (1999, 2000年澳門中學生趣味科學比賽),
organized by Education and Youth Affairs Department (澳門教育暨青年局), Associacao de
Educacao de Macau (澳門中華教育會), University of
Macau (澳門大學) and The Macau
Institute of Engineers (澳門工程師學會), (1999, 2000)
- Member of the Referee Panel, The
1999, 2000, 2001 and 2007 Macau High School Fun Science Competition (1999,
2000, 2001, 2007年澳門中學生趣味科學比賽),
organized by Education and Youth Affairs Department (澳門教育暨青年局), Associacao de
Educacao de Macau (澳門中華教育會), University of
Macau (澳門大學) and The Macau
Institute of Engineers (澳門工程師學會), (1999-2007)
Back to Top